Note: Two Guide Rail Connectors are required to join rails. Use 2 guide rail connectors to connect one Festool guide rail to another Festool guide rail. Create infinitely long rails for perfectly straight, splinter free cuts. Simply tighten the two set screws on the guide rail connector once it is inserted in the guide rail t-slot of both rails. 2 connectors are required. 1 included in package.
Quick Tip! To maintain a perfectly straight connection between two guide rails be sure to leave a business card sized gap between the two rails you intend to connect. Once the guide rail connectors (qty 2) are in the t-slots between the two rails and bridging the small gap, grab a Festool Plunge Cut Track Saw. Lay the saw on one of the rails and slide it over the gap between the rails. Once the base of the saw (which is perfectly true) is over the gap, tighten the two green cam locks. Once the locks are tightened your two rails are now connected in a straight line. Tighten the set screws on the guide rail connectors.