Pattern DS117

Clear


ORDER SAMPLE

REQUEST CUSTOM COLOR

Note: Ordering this product acts as a request for delivery. Upon completing your order, one of our specialists will contact you to determine any applicable costs to receive this product.


Additional information

color

012 X03662 LNX03661, X03668 LNX0462 LNX01339 LNX03008 LNX03602

  • Due to the handmade process of Kinon and the infinite number of color and pattern combinations, we maintain a limited (and readily available) inventory of samples. The samples displayed in our collections above are available for immediate shipping. If you need a specific color that is not shown, please contact your sales representative, they will determine if there are any associated manufacturing and/or shipping fees. Allow 2-3 week lead time for products that are not currently available. Please contact your Sales Representative for more information regarding this policy.
  • Kinon® is a proprietary crafted art sheet for luxury surfaces. Some of our patterns are lineal and are offered in horizontal and/or vertical directions, others are lineal but are only offered in one of these directions, this is noted on the spec sheet. To determine your yield you need to understand your pattern orientation.Are you making cabinetry, furniture, or wall panels? There is a myriad of applications so please be clear. How are you planning to install? Are you planning on using the material in wet areas or dry? Kinon is an incredibly versatile material and can be installed with various adhesives. For instance, in cabinetry and hanging panel systems you want to use either solvent-based contact cement or PUR adhesive processes to attach Kinon like a laminate to a panel. If you are planning on using Kinon in a bathroom shower, or want to apply the material directly to sheetrock, you would apply it like a tile with mortar LFT blended with latex additive. We have sections of the website dedicated to explaining these methods in greater detail. Additionally, your Kinon representatives can assist you in choosing the best methods for your applications.
  • Kinon® patterns are original artwork and are protected by Copyright©.
  • Kinon®  is a handmade artisan thermo-set sheet. Various techniques are carefully used to create our artistic patterns. Therefore like stone and wood, panels will be strikingly similar but never exactly the same. Over a large panel, it will have numerous shades and tones, inherent to the Kinon® visual. The surface will also have undulations as well as tiny pores, holes, and knots. There will be some irregular pattern repeats which are not seen on a small size sample.
  • All Kinon® sheet thicknesses vary from pattern to pattern and over a full panel of artwork. This is a handmade process.
  • All materials age and oxidize. Expect to receive lighter color material with all lighter color Kinon® product orders. The materials will age to the colors of the samples you have over time
  • Due to the handmade process of Kinon and the infinite number of color and pattern combinations, we maintain a limited (and readily available) inventory of samples. The samples displayed in our collections above are available for immediate shipping. If you need a specific color that is not shown, please contact your sales representative, they will determine if there are any associated manufacturing and/or shipping fees. Allow 2-3 week lead time for products that are not currently available. Please contact your Sales Representative for more information regarding this policy.
  • Kinon® is a proprietary crafted art sheet for luxury surfaces. Some of our patterns are lineal and are offered in horizontal and/or vertical directions, others are lineal but are only offered in one of these directions, this is noted on the spec sheet. To determine your yield you need to understand your pattern orientation.Are you making cabinetry, furniture, or wall panels? There is a myriad of applications so please be clear. How are you planning to install? Are you planning on using the material in wet areas or dry? Kinon is an incredibly versatile material and can be installed with various adhesives. For instance, in cabinetry and hanging panel systems you want to use either solvent-based contact cement or PUR adhesive processes to attach Kinon like a laminate to a panel. If you are planning on using Kinon in a bathroom shower, or want to apply the material directly to sheetrock, you would apply it like a tile with mortar LFT blended with latex additive. We have sections of the website dedicated to explaining these methods in greater detail. Additionally, your Kinon representatives can assist you in choosing the best methods for your applications.
  • Kinon® patterns are original artwork and are protected by Copyright©.
  • Kinon®  is a handmade artisan thermo-set sheet. Various techniques are carefully used to create our artistic patterns. Therefore like stone and wood, panels will be strikingly similar but never exactly the same. Over a large panel, it will have numerous shades and tones, inherent to the Kinon® visual. The surface will also have undulations as well as tiny pores, holes, and knots. There will be some irregular pattern repeats which are not seen on a small size sample.
  • All Kinon® sheet thicknesses vary from pattern to pattern and over a full panel of artwork. This is a handmade process.
  • All materials age and oxidize. Expect to receive lighter color material with all lighter color Kinon® product orders. The materials will age to the colors of the samples you have over time

Ultra Cast

5 ft x 12 ft x 0.11 in

1524 mm x 3658 mm x 2.7 mm

The Ultra Cast approximate weight per ft²  is 0.6 lbs

The Ultra Cast Metal approximate weight per ft² is 1.2 lbs

KCD and Mold patterns thickness vary from 3.2 mm +/- 0.8 mm in Ultra Cast. 

Kinon Ultra Cast is not structural and should be adhered to a suitable substrate.

MDF (Medex FR)

*No added formaldehyde

*Water resistant

5 ft x 12 ft x 3/4 in

1524 mm x 3658 mm x 19 mm

The MDF (Medex FR) approximate weight per ft² is 3.75 lbs

3/4” is the thickness of the MDF. The Kinon will be approximately 1/16“ to 1/8“ additional to the MDF depending on pattern selection. Please call your representative before you place your order.

MDF (Medite)

*Class A Fire Rated

5 ft x 12 ft x 3/4 in

1524 mm x 3658 mm x 19 mm

The MDF (Medite) approximate weight per ft² is 3.35 lbs

3/4” is the thickness of the MDF. The Kinon will be approximately 1/16“ to 1/8“ additional to the MDF depending on pattern selection. Please call your representative before you place your order.

APPLICATIONSMDF MEDITE FR 3/4MDF MEDEX 3/4ULTRA CAST
WALL PANELINGXXX
CEILINGSXX
CABINETRY & FURNITUREXX
DOORSXX
TABLESXXX
NEEDS TO BE ADHERED TO STRUCTURAL SURFACEX
MOISTURE RESISTANTXX
LIGHTWEIGHTX
CUTS WITH LAMINATE GRADE SAW BLADESXXX
CUTS WITH ROUTER BITSXXX
ADHERES WITH SOLVENT BASED CONTACT ADHESIVEX
ADHERES WITH THIN-SET MORTARX
CAN BE DRILLED INTO AND BOREDXXX
FLEXIBLE WITHOUT KERFING FOR CURVED APPLICATIONSX
FLEXIBLE WITH KERFING FOR CURVED APPLICATIONSXX
AVAILABLE WITH M LABELED PRODUCTSSome

Harmonized Codes for International Shipping

 

with MDF: 4410.11.0030

with Ultra Cast: 3904.30.2000

 


 

Shipping & Handling 

 

1. When picking up orders from our facility all 5' X 12' and smaller panel dimensions require a truck with a minimum 16' closed cab and a standard dock height loading capability of 44". Standard 5' X 12' and smaller panels are shipped in 154”X 68” crates with a maximum 21" height. Weight will vary depending on the material and quantity of panels. Crate must ship flat, non stackable.

2. International shipments must use AIR FREIGHT METHODS ONLY, NEVER SHIP BY SEA.

3. Always ship, store and use Kinon in a temperature controlled environment so the material does not exceed temperatures below or above 50*F - 80*F (10*C - 26.6*C) and kept out of the elements. Excessive temperatures and extreme temperature changes will cause rapid aging and degradation of multiple facets of the material.

4. All materials age and oxidize. Fresh Kinon® will come lighter toned than the aged sample that you have. The materials will age to the colors of the samples you have overtime.

5. Kinon Ultra Cast is not structural and should be adhered to a suitable substrate.

6. Kinon panels are handmade and have multiple shade, texture and pattern variations. Expect small holes and/or pores on surface.

7. Do not apply any protective films outside of manufacturer’s recommendation. You will receive Double Cast with our protective film. After removing film, clean material with Meguiar’s Last Touch Spray Detailer D155 using a microfiber cloth. If there is residue from the film’s adhesive, polish with Farecla Premium liquid compound using a buffing machine at 1500 to 1800 rpm.

8. Do not mix and match different lot materials of any light and white colors (white, beige, gray, silver). Use material for the intended project to ensure that material will age at the same rate.

9. Ultra Cast, Mold and KCD Panels are not true 5ft x 12ft dimension. Actual usable size will be 58in x 143in (1473mm X 3632mm). Ultra Cast thickness is 2.5mm +/- .5mm. Mold & KCDs 3.5mm +/- .5mm. Get confirmation on thickness from your representative.

 

  • Various techniques are carefully used to create different patterns. Therefore like stone and wood, no two panels are ever the same. Over a large panel, it will have numerous shades and tones, and the surface will have pattern specific textures and undulations as well as tiny pores.

 

  • THE CLOSE UP PHOTOS SHOWN BELOW ARE TAKEN WITH A MACRO LENS FROM ABOUT 1″ TO 3″ (2.54 CM TO 7.62 CM) FROM THE SURFACE OF THE PANEL.
  • THESE PHOTOS ILLUSTRATE UNDULATIONS, TINY PORES, FISHEYES/SMALL DOTS, AND COLOR SHADING. THESE UNDULATIONS ARE NOT A DEFECT OF THE PANEL.  THEY APPEAR IN ALL OF OUR PANELS AND ARE A PART OF THE HANDMADE PROCESS AND BEAUTY OF THIS UNMATCHED IN QUALITY RESIN APPLICATION.