Fabrication Methods

For more information about the Fastmount System: http://www.fastmount.com Step 1: Shim and level (if necessary). Fasten with screws to studs & framing and use anchor

Phone Number: 631-750-3000 Email: zclip@monarchmetal.com http://www.monarchmetal.com

Lamination & Edge Banding to wood with Contact Adhesive Kinon® Ultra Cast is easily laminated with solvent-based contact adhesive. We recommend the use of solvent-based contact

PUR Hot Melt Adhesive Applications: Kinon will adhere with many PUR hot melt adhesives. So, you can easily laminate your Kinon® Ultra Cast to wood

Matte and Satin finishes are easily achieved with Kinon with Post Catalyzed varnish spray application or urethane spray. The process of spray applying a finish

The surface is designed so most surface scratches can be repaired with simple sanding and polishing unlike common laminates. Kinon Sheets are sanded and polished

Kinon® will cut cleanly with standard woodworking tools such as various types of saws including table saws, sliding table saws, miter saws and hand-held track

Kinon® will cut cleanly with router bits and drill bits. Use your handheld router or CNC machine for an incredibly beautiful cut result. When needing

Hand-held router or CNC machine Kinon will router with handheld routers for standard lamination trim removal or cut your parts with a CNC machine. Use

When you are fabricating Kinon and want to protect the surface we recommend the use of blue painters tape.

Kinon® Ultra Cast is flexible; Please see the images below. Please contact your Kinon Sales Representative if you need more information on how you can

Cleaning & sanitizing is simple with KINON Sanitizing Cleaner SAC0001. Kinon surfaces do not have absorbing properties and have no supporting ingredients for microbial life.